Create a Part Specification
Create a Part SpecificationYou can create a part specification for a single part, with the same name as the part, or for global use, with a unique name.
When the part specification applies to a single part, create on the part Specifications page.
This method gives the specification the same Name as the part.
The part Properties window displays.
Select Specifications on the Part Category Tree.
The Specifications page displays.
Click 
> Create
Part Specification. . . on the page tool bar.
The Create Part Specification window displays
The Connect To field defaults to the context part and can not be changed.
Select a Type using the drop down list.
Enter an appropriate Title for the part specification.
Enter a Description, as needed.
Change or select a
Design Responsibility using the browse/choose button 
.
The Design Responsibility of specifications you create is set to your default RDO, if established. See Set a Default RDO.
Only projects in which you have the Design Engineer role are allowed.
In some cases a part specification may be owned by a different RDO than that of the part -- such as the Design Center owning Artwork.
Click Done.
The specification document container is added to the part.
The specification does not initially contain any files. See Add a New File to a Document.
To create a part specification that is independent of any part:
Select
> Engineering >Specifications
> Create Part Specification. . . on the ENOVIA
Top Bar.
or
In the Engineering BOM App > Engineering >
My Engineering View > Specifications and select 
>
Create Part
Specification.
The Create Part Specification window displays.
Select a Type using the drop down list.
Enter an appropriate Title for the part specification.
Enter a Description, as needed.
Change or select a
Design Responsibility using the browse/choose button .
The Design Responsibility of specifications you create is set to your default RDO, if established. See Set a Default RDO.
Only projects in which you have the Design Engineer role are allowed.
To relate the specification to a part,
click the Connect To Browse/Choose
button to find and select the part.
Click Done.
If the part specification was created from the button on the ENOVIA
Top Bar, the Specification Properties
page displays.
If the part specification was created on the Specifications page, select the Specifications link on the Engineering BOM App again, to refresh the list and see the newly created specification.
The specification does not initially contain any files. See Add a New File to a Document.